TMOF519 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR
CURVE NECK DESIGN DECK-MOUNTED AUTOMATIC SENSOR TAP WITH INTEGRATED SPOUT SENSOR EYE
Water Saving Options | ||
6 LPM | 1.58 GPM | PCA Stream |
4 LPM | 1 GPM | PCA Spray |
3 LPM | 0.8 GPM | PCA Spray |
1.89 LPM | 0.5 GPM | PCA Spray |
1.3 LPM | 0.35 GPM | PCA Spray |
Technical Information
Control box: Diameter of ‘inlet’ pipe: G1/2”
Control box: Diameter of ‘outlet’ pipe: G1/2”
Water pressure range: 0.75 (Min) – 7 Bar (Max)
Voltage: DC6V or AC220V-240V (6V Output)
Power consumption: =0.3mW
Sensing distance: 6-24cm
Respond time: 1 Second
Battery Consumption (DC): 4xAA alkaline batteries (up-to 2yr lifespan depending on level of usage)
Silent Consumption: 0.003mW
Environment Temperature: 1-45 C
Flow Rate: 6L/Per minute
Pipe Threading: British Standard Whitworth (BSW)
Noise Class: 1
Finish: Chrome-plated
Voltage: DC6V or AC220V-240V (6V Output)
Contents
1x Sensor Tap (with a flexible hose attached)
1x Control Box (*battery compartment inside)
1x AC cable (UK plug)
1x Transformer (Built inside control box)
1x Control box ‘wall-mounting’ clip
Fittings and Screws
Temperature Control
Option: 1
This thermostat can be connected directly to the control box using it’s 1/2″ female outlet connector. This method is usually the quickest way to setup installation.
Option: 2
This thermostat has a ‘wall-mounting’ bracket that can be mounted on the wall and linked to the control box ‘inlet’ via a connecting pipe or a flexible hose (not supplied).
TIP:
You can run up-to three (3) sensor taps (maximum) with one thermostat. Water pressure of both hot and cold supplies must be at least 3 bar.
Option: 3
This is a manual blending valve, adjustable by hand only. There’s no thermostatic mixing element inside. Any desired temperature can only be achieved ‘manually’ by turning the knob clockwise or anti-clockwise by hand.