TMOF002 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR

SINGLE-SUPPLY SWAN-NECK DESIGN

Water FeedSingle supply

FinishChrome-plated

TypeDeck-mounted

FeaturesDeck-mounted with integrated ‘fiber-optic’ spout sensor
Intelligent ‘auto-adjust’ sensor distance
Unique and Versatile Design
Conserve water and Hygienic
AC+DC Powered: Mains/4XAA Alkaline batteries (up-to 2yr lifespan)
Hands-free infrared activation
Exquisite and stylish design
Solid brass construction
New control box design: ACB-0112
Compatible with IOF-001 Remote Control
Water pressure required: 0.5-7 Bar (1 bar or above for best performance)

Note:
This is a single-supply sensor tap, to regulate/mix hot and cold water together, a thermostatic mixer or a blending valve will be required.IOF-001 Remote Control:
This tap is compatible with IOF-001 Sensor Remote Control (Sold separately).

Power OptionBatteries (Mains optional).

Drilling30mm

Water Pressure0.75bar (Minimum) – 1bar (Recommended)

	Water Saving Options
6 LPM	1.58 GPM	PCA Stream
4 LPM	1 GPM	PCA Spray
3 LPM	0.8 GPM	PCA Spray
1.89 LPM	0.5 GPM	PCA Spray
1.3 LPM	0.35 GPM	PCA Spray

Technical Information

Dimension

Contents

Temperature Control

Remote Control

Technical Information

Control box: Diameter of ‘inlet’ pipe: G1/2”
Control box: Diameter of ‘outlet’ pipe: G1/2”
Water pressure range: 0.75 (Min) – 7 Bar (Max)
Voltage: DC6V or AC220V-240V (6V Output)
Power consumption: =0.3mW
Sensing distance: 6-24cm
Respond time: 1 Second
Battery Consumption (DC): 4xAA alkaline batteries (up-to 2yr lifespan depending on level of usage)
Silent Consumption: 0.003mW
Environment Temperature: 1-45 C
Flow Rate: 6L/Per minute
Pipe Threading: British Standard Whitworth (BSW)
Noise Class: 1
Finish: Chrome-plated
Voltage: DC6V or AC220V-240V (6V Output)

Please follow and like us:

Dimension

Please follow and like us:

1x Sensor Tap (with a flexible hose attached)
1x Control Box (*battery compartment inside)
1x AC cable (UK plug)
1x Transformer (Built inside control box)
1x Control box ‘wall-mounting’ clip
Fittings and Screws

Please follow and like us:

Temperature Control

Option: 1

This thermostat can be connected directly to the control box using it’s 1/2″ female outlet connector. This method is usually the quickest way to setup installation.

Option: 2

This thermostat has a ‘wall-mounting’ bracket that can be mounted on the wall and linked to the control box ‘inlet’ via a connecting pipe or a flexible hose (not supplied).

TIP:
You can run up-to three (3) sensor taps (maximum) with one thermostat. Water pressure of both hot and cold supplies must be at least 3 bar.

Option: 3

This is a manual blending valve, adjustable by hand only. There’s no thermostatic mixing element inside. Any desired temperature can only be achieved ‘manually’ by turning the knob clockwise or anti-clockwise by hand.

Please follow and like us:

Remote Control

Please follow and like us:

TMOF002 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR

SINGLE-SUPPLY SWAN-NECK DESIGN

Technical Information

Dimension

Contents

Temperature Control

Remote Control

Related products

TMOF003 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR

TMOF519 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR

TMOF001 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR

TMOF004 TOUCH FREE LAVATORY FAUCETS WITH IN-BUILT SPOUT SENSOR